Bauer’s Vapor X 6.0 Stick is the third stick down in the Vapor line from Bauer for 2012. It is behind the APX and the 7.0. Like those two sticks, it features Bauer’s Intelli-sense shot technology for flex profile, and basically what that means is that depending on the shot you’re taking and where your hands are placed, it’s going flex a little bit differently. Taking a slapshot, it’s going to load up and give you a little extra power in that shot; in a snapshot or a wristshot, it will give you a quicker release.
Down in the blade, it features that same Aero Foam technology that you see in the APX and the 7.0. It’s a lighter foam inside, a little bit stronger and will provide a little more feel back on the puck when you’re stickhandling. The connection from the shaft to the blade features Bauer’s Pure Shot blade profile. And what that is, a thickened connection in the hosel, going from the shaft to the blade to strengthen the connection point. That’s going keep the blade from flexing back on shots and deflecting off, and keep the blade nice and square to your target. Along the same lines here is the Vapor Premium Taper, which is a secondary taper along the top and the bottom of the shaft, and what that does is that it will strengthen it out, reduce the torsion of deflections so the blade stays square.
Up in the shaft is the Microfeel II shaft, which is the same as found on the APX. It’s a little bit round in the corners, double concave on the front and the back of the shaft, just for a little bit more comfort and a little more control, and to strengthen the stick. This one has the Grip Tack finish, for a little bit more grip on the stick. The Bauer Vapor X 6.0 stick available at Purehockey.com and all Pure Hockey locations.